Security revolving doors offer excellent single-person detection (SPD) using highly reliable sensors which can tell if more than one person has entered the same section of the revolving door at the same time.
This prevents all fraudulent attempts at entry or exit, such as piggybacking or tailgating. Sensors also ensure the prevention of wrong way entry and exit.
The best detection systems are calibrated so that they are not affected by the size of a person, the position of the person in the booth or by someone carrying a large amount of luggage.
A security revolving door seals entry and exit to areas extremely effectively. However, always check with your security provider whether the product offers the proper certified resistance. A good security revolving door will have a certification for protection against ballistic and blast attacks.
|
Make sure that this is legitimate product certification and not simply a test lab certificate. The product delivered should be stamped by an accredited certification body (such as ICIM) and should carry an authorised product certificate. It should also carry an expiry date. The lack of an expiry date is normally a clue that the certificate is not properly valid.
Security revolving doors can offer bi-directional traffic which is electronically controllable. This is not available from all products on the market as often the door can be set to either entry or exit, but not both.
However, more advanced models are able to manage both entry and exit simultaneously, allowing for greater throughput.
At up to 48 people per minute, security revolving doors boast a rate only speed gates can better.
In terms of design, security revolving doors come in a range of materials and finishes with a good level of customisation available.
This ensures that you will be able to install an entrance control solution which not only fits in with the existing architectural design of your building, but also enhances it.
To facilitate the design process, good security providers will have their various styles of security revolving door available for download as BIM objects. A BIM (Building Information Modelling) object is a 3D representation of a building element which is compatible for use in architectural planning software.
A security revolving door can be installed semi-externally into the entrance of a building (with half of the door outdoors and the other half indoors) or 100% internally.
As an entrance system, a security revolving door should be compliant — and certified — with the relevant safety standards for pedestrian equipment.
The relevant standard in terms of safety for revolving doors in public use is EN 16005
As with resistance certification, check with your security provider that the product you are buying meets the correct safety requirements.
Typical features include safety edges which will stop the door rotating if an obstruction is detected.
Read more about Gunnebo Entrance Security solutions.